 |
CMFA-P2000Combustion gas measurements for NOX efficiency and product quality are especially challenging in the glass container manufacturing process. Two types of gas-fired furnaces exist that require post and pre combustion gas analysis. The glass furnace or "melt-tank" is fired by conventional burners that mix pre-heated air and fuel in the burner nozzle. Ambient air leakage in the heat re-cooperation structure can generate thermal NOX in the combustion flames while creating significant thermal energy losses. Flue gas temperature and vaporized glass particulates limit economical excess oxygen analysis to spot sample measurements at opposing-burner checker ports. more ... |
|
|
|
|
|
|
|
PreMix 2000Forehearth zone temperature is critical to proper flow of molten glass to fiber forming equipment. The combustion atmosphere in fiber forming baskets is equally important to ensure fiber quality and consistancy. Forehearth zone temperature and fiber forming atmosphere are both controlled by adjusting the air to fuel ratio of descrete premix burner stations feeding these systems. Continuous analysis of resultant excess oxygen or excess fuel from air to fuel ratio adjustments is needed to automate the glass fiber manufacturing process. more ... |
|
|
|
|
|
|
 |
S A/F IQWaste gas, biogas, off-gas, blast furnace and coke oven gas are often used as fuel for boilers, reboilers, furnaces, gas turbines and incinerators. The highly variable BTU content makes it difficult to use these fuels efficiently, safely and with minimum emissions. This analyzer directly measures the flow of air needed to burn a flow of a variable composition fuel gas. It can be used to compensate for the non-uniformity in gas supplies and to aid in the efficient utilization of by-product and waste-gas streams as fuel. more ... |
|
|
|
|
|
|
 |
TM2000 Oxygen AnalyzerThe TM2000 net oxygen analyzer protects industrial processes by quickly responding to changes using an industry proven zirconium oxide sensor. It operates within a wide range of 0.1 ppm to 100% oxygen, and can accurately respond from atmosphere to low ppm oxygen levels in just seconds.more ... |
|
|
|
|
|
|
 |
WDG IV ProductsThe WDG-IV analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency.more ... |
|
|
|
|
|
|
 |
WDG IVCM/IQ 0-500 PPMThe WDG-IVCM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency.more ... |
|
|
|
|
|
|
 |
WDG IVMThe WDG-IVCM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and lightoff cycles during start-up and shutdown.more ... |
|
|
|
|
|
|
 |
WDG-IV UOP/RPThe UOP Continuous Catalyst Regeneration Process requires low-level continuous oxygen measurement during the regeneration process to protect the Platonized catalyst from oxidation. The process is operated at elevated temperature and pressure. The flue gas contains low levels of HCL and catalyst fines. The critical oxygen measurement analyzer must be able to survive the veracious nature of the process while maintaining a high level of accuracy at low level oxygen concentrations. more ... |
|
|
|
|
|
|