LAND FGAII Chiller Probe

		FGAII ChillerProbe

The ChillerProbe™ combines a high performance heated filter unit, with an advanced sample cooler to clean and dry the flue gas right at the sampling point. This means that only dry sample gas is transported to the FGAII stack gas emissions analyser minimizing potential errors - removing the need for heated sample lines.

Key Features	Key Benefits
Large area heated ceramic filter 2-stage sample cooler and dryer system Heated blow-back to maintain clean probe and filter Wide range of probe tubes and pre-filter options Easily removable heated filter and probe tube Remote digital control from analyser	Highest sample integrity is maintained for greater accuracy Heated sample lines not required in most applications Simple, low cost installation - single flange mounting Probe remains clean and particulate free at all times Simple maintenance - easily accessible with unique enclosure design

ChillerProbe Specifications

Sample Conditioning
Filtration:	Heated unit with replaceable element 180 °C / 356 °F suitable for most applications 280 °C / 536°F for applications where ammonia is present in the flue gas
Filter Element:	1.0 µm ceramic
Sample Cooler:	2-stage cooler system (incorporating Peltier unit) with automatic condensate removal
Blow-back
Method:	Heated, filtered, compressed air
Triggers:	Internal timer; external trigger (via digital link); Manual (push button); +24 V external drive
Temperature:	150 °C / 300 °F
Timer Interval:	15 minutes to 24 hours user selectable
Duration:	3 secs
Control System
Communications:	Remote control via RS 485 digital link
Automatic Controls:	Filter temperature; Cooler temperature; Condensate removal; Blow-back timing; Blow-back air temperature
Manual Controls:	Blow-back trigger
Status LEDs:	Power; Blow-back; System OK; Communications
Status Outputs (via digital link):	Filter temperature; Blow-back air temperature; Blow-back pressure; Cooler Temperature; Enclosure temperature; Condensate pumps active; Sample gas temperature (optional)
Alarms (indicated at analyzer):	Filter temperature (low/high) Blow-back accumulator temperature (low/high) Cooler temperature (low/high) Blow-back accumulator low pressure Moisture slip Pump fault
Relay Outputs:	System OK; Blow-back in progress; Filter cold; Cooler fault
Additional Output:	Power for anti-freeze condensate sample line
Environmental
Enclosure:	Stainless steel sealed to the requirements of IP 65 / NEMA 4X
Operating Temperature:	-25 to + 55 °C / -13 to +131 °F (option to -40 °C / -40 °F)
Compliance
EMC:	Conforms to EN-61326 (Class A)
Electrical Safety:	Conforms to EN-61010-2
Power
Power Supply:	110 or 230 V a.c., ±10%, 50 or 60 Hz
Power Consumption:	900 W
Air Requirements
Air Requirements for cooling:	Dependent upon ambient temperature and process conditions
Dimensions (H x W x D)	685 x 510 x 356 mm / 27 x 20 x 14 in
Weight:	56 kg / 124 lb
Mounting:	Single flange - 3" ANSI, 150 lb type
Flange Temperature:	up to 180 °C / 356 °F without adaptor up to 500 °C / 932 °F with adaptor
Optional Flange Adaptor:	2", 3", or 4" ANSI 150 lb; DN65 PN6
Probe Pipes and Materials
316 Stainless Steel :	up to 600 °C / 1112 °F
Hastelloy C-276:	up to 900 °C / 1652 °F
Hastelloy X:	up to 1200 °C / 2200 °F
Mullite:	up to 1700 °C / 3100 °F
Lengths*:	0.5 m / 1.6 ft; 1.0 m / 3.3 ft; 1.5 m / 5 ft; 2.0 m / 6.6 ft
Probe Pre-filter#:	2.0 µm Sintered stainless steel (Temp. <400 °C / 750 °F) 2.0 µm Hastelloy (Temp. up to 800 °C / 1470 °F)
* Mullite probes only available in 0.5 and 1.0m lengths # Available with all probe types except mullite:
Options
Sample Gas Cooler Temp. sensor:	Type K thermocouple
Air blower for instrument cooling:	Low capacity or high capacity blower units