WR-Model 9000RM Gas Analyzer

		Model 9000RM Gas Analyzer

NEW GENERATION! REPLACES MODELS 921 AND 922.

The AMETEK Model 9000^RM is a rugged single or multi-component gas analyzer housed in a single 19-inch, rack-mountable unit that can be integrated into Continuous Emission Monitor Systems (CEM) or used alone for a variety of gas monitoring applications.

The Model 9000^RM can be configured to measure most gas species that absorb in the UV (examples NOx, H₂S and SO₂). The optional low range white cell provides longer path length for measuring lower concentrations. For example, the minimum full scale for SO₂ is 25 ppm, with an accuracy of 1% of full scale.

Resolution better than 0.02 nm is provided by high intensity, line source lamps. These sources emit at a fixed wavelength, providing great measurement stability, and emit low total power, removing the potential for sample photolysis. The high resolution enables unparalleled linearity over a wide dynamic range (less than 1% deviation over 4 to 5 orders of magnitude) which, in turn, leads to simple, robust data analysis.

Other Product of Interest

Model 914 Continuous Emission Monitoring System

Specifications
Species Measured	Single Species Minimum Full Scale	Multi-Species Minimum Full Scale
SO₂	25 ppm	50 ppm
H₂S	50 ppm	100 ppm
NO	50 ppm	200 ppm*
NO₂	100 ppm	200 ppm*
NOx	n/a	200 ppm*
* Lower ranges available upon request

Maximum full scale on all systems:	100%
Methodology:	Multiple wavelength, high resolution, non-dispersive ultraviolet
Optional O₂:	Integral paramagnetic sensor
Accuracy:	Better than 1.0% of standard full scale range O₂ : ±0.1%
Repeatability:	±0.5% full-scale of standard ranges O₂ : ±0.2% (reading varies by 0.05% due to A/D resolution)
Linearity:	SO₂: < ±1.0% full scale NO, NO₂, NOx, H₂S: < ±1.5% full scale O₂: ±0.1%
Response Time:	90% in 30 seconds or less
Number of Gases:	1 (single species version) Up to 5 (multi-species version)
Typical Sample Flow:	0.25 - 5 l/min (0.6 - 10.5 SCFH)
Sample Gas Requirements:	Noncorrosive, non-condensing, free from oil and with less than three micron particulates (0-95%, non-condensing)
Sample System Limits:	5 psig max (without the dynamic pressure compensation option, the reported concentrations will be directly proportional to barometric pressure)
Pressure and Temperature Compensation:	Optional
Ambient Conditions
Storage:	-40 to 70˚C (-40 to 158˚F)
Operating:	-20 to 50˚C (-4 to 122˚F) without Paramagnetic O₂ sensor, 0 to 50˚C (32 to 122˚F) with Paramagnetic O₂ sensor 0.95 Relative Humidity
Zero Drift:	Typically better than 2% full scale standard ranges in 24 hours
Utility Requirements
Electrical:	120 VAC (105 to 132 VAC), 47 to 63 Hz 240 VAC (209 to 264 VAC), 47 to 63 Hz
Power Consumption:	< 300 W maximum start-up (from a cold start) with average power dependant on ambient temperature
Outputs:	Two (expandable to six) isolated Analog Outputs, each configurable to 0-20 mA, 4-20 mA, 0-5V DC Four (expandable to six) Relay Contacts, Contact Form A (SPST), normally open. Switching: maximum 240 V DC, 0.5 A DC, limited to 10 W. Carry: maximum 1.2 A DC Four optional solenoid drivers 24 V DC 0.5A max.
Inputs:	Two optional isolated analog inputs, each configurable to 0-5 Volts or 0-20 mA. Two (expandable to four) contact inputs, each pair isolated from analyzer. Voltage 5 V DC unregulated. Current approx. 7 mA.
Communications:	Modbus RTU RS485 and Modbus TCP Fast Ethernet - network connection or web-based server
Physical Dimensions (W x H x D):	48.2 cm x 17.7 cm x 60.256 cm (19 in. x 7 in. x 23.7 in.)
Weight:	18.2 kg (40 lb)