5812 Moisture Analyzer

Model 5812 Moisture Analyzer

Measuring moisture in natural gas is not a difficult application, but reliably measuring on a continuous basis is. Glycols and entrained compressor oils can quickly contaminate or damage most moisture sensors. In addition, many moisture analyzers have no means to detect the presence of such contamination, leading to inaccurately monitored or completely unmonitored gas streams.

Other Products of Interest

  • Specifications +

    Range  Calibrated 1 to 1000 ppmv with trend indication above calibrated range
    Outputs  Four line x 20 character vacuum fluorescent digital display
    Two fully programmable 4 to 20 mA analog outputs, into 1200 ohm load
    RS484 bidriectional serial port
    Alarms  Three independent contact closures, 30 VDC maximum, 1A resistive load for system alarm, range alert/or calibration alert, concentration alert/or calibration alert. Alarm signals are available on the RS484 interface.
    Sensitivity  0.02 ppmv or 0.5% of range, whichever is greater
    Accuracy  ±1.0 ppmv or ±5% of reading, whichever is greater 
    Operating Pressure  Atmospheric
    Inlet Pressure  1 to 10 Bars (15 to 150 psig) 
    Exhaust Pressure  Atmospheric 
    Sample Flow Requirements Less than 600 mL/min at STP
    Reference Gas Quality Requirements Provided by included dryer and contaminant trap
    Sample Gas Temperature 0º to 100ºC (32º to 212ºF)
    Ambient Operating Range 4º to 40ºC (40º to 105ºF), 90% relative humidity, non-condensing, noncorrosive atmosphere
    Software Features Displays ppmv, dew point, or lb/mmft3 moisture reading, timer status, and instrument status
    Power Requirements 85 to 265 volts, 47 to 63 Hz
    Mounting Options Available for stand-alone or 19" rack installation
    Dimensions (WxHxD) 43.2 x 13.2 x 38.1 cm (17 x 5.2 x 15 in)
    Rack-mount Version Same as above, except height is 22.1 cm (8.71 in)
    Net Weight 8.2 kg (18 lb)
  • Documents +

  • Certifications +

    • NEC/CEC Class I, Div 2, Groups A, B, C, D, T3C
    • CE LVD EN61010-1/UL3101-1/CSA)1010.1
    • CE EMC EN50081-1, EN50082-1
    • Installation Category II, Pollution degree 2
    • Gosstandart Pattern Approval No. 1407