Tag-Listing

Tag Articles : Refinery

• 

  {2}

  {1} {4}

  {6}

  {3}

  Keep Reading

  {0}
• 

  Advancing Hydrogen Measurement in TGTU with the 993X Gas Analyzer

  Friday, April 24, 2026 | Niravkumar Patel

  Applications Products

  Refinery operations are undergoing a noticeable shift. Hydrogen (H2), once readily available, is now treated as a valuable commodity. At the same time, the industry is placing greater emphasis on carbon management, with increasing focus on carbon dioxide (CO2) capture and emissions reduction.

  Keep Reading
• 

  Solving Sampling Challenges with Probes

  Thursday, August 22, 2024 | Niravkumar Patel

  Products Applications

  Sampling toxic gases like hydrogen sulfide or sulfur dioxide for analysis poses significant challenges, primarily due to the high toxicity of these gases, the presence of high water or sulfur dew points, and the disposal of the hazardous analyzed sample.

  Keep Reading
• 

  System Solutions to Meet Your Analysis Goals

  Wednesday, April 12, 2023 | Donna Koev

  Applications

  Energy conservation has always been important to the oil and gas industry but is becoming increasingly critical in the current economic and environmental climate.

  Keep Reading
• 

  Part 5: Addressing the Impacts of Changing Regulations and Feedstocks in Sulfur Recovery Units

  Wednesday, September 15, 2021 | Michael Gaura

  Applications Technologies

  Continuous Emissions Monitoring Systems. Measurements at the thermal oxidizer are driven by regulatory requirements.

  Keep Reading
• 

  Part 4: Addressing the Impacts of Changing Regulations and Feedstocks in Sulfur Recovery Units

  Wednesday, September 8, 2021 | Michael Gaura

  Applications Technologies

  Tail Gas Treatment. For SRUs equipped with TGTUs, proper analyzer selection and installation can result in high measurement availability (high uptime) and prevention of significant operational expenses when the unexpected occurs.

  Keep Reading
• 

  Part 3: Addressing the Impacts of Changing Regulations and Feedstocks in Sulfur Recovery Units

  Wednesday, September 1, 2021 | Michael Gaura

  Applications Technologies

  Tail gas/air demand analysis. A tail gas or air demand analyzer is located after the final condenser and is present in nearly every SRU.

  Keep Reading
• 

  Part 2: Addressing the Impacts of Changing Regulations and Feedstocks in Sulfur Recovery Units

  Wednesday, August 25, 2021 | Michael Gaura

  Applications Technologies

  Feed Gas Analysis. Gas streams entering the SRU are often referred to as ‘SRU feed gas’ and are complex as they can include many different components at varying concentrations.

  Keep Reading
• 

  Part 1: Addressing the Impacts of Changing Regulations and Feedstocks in Sulfur Recovery Units

  Wednesday, August 18, 2021 | Michael Gaura

  Applications Technologies

  The efficient and reliable operation of sulfur recovery units (SRUs) continues to be critical to hydrocarbon processors, which are tasked with delivering end products that contain lower levels of sulfur while simultaneously reducing the amount of sulfur that is emitted to the local environment.

  Keep Reading
• 

  Combustibles vs. COe – Navigating Industry Terms

  Wednesday, March 18, 2020 | Tim Tallon

  Applications Technologies

  There are many terms used in the combustion industry. One is the concept of “combustibles” for detecting the onset of incomplete combustion for safety, and for optimizing the combustion process for fuel efficiency. This article provides a basis for understanding combustibles measurements and related terms, such as “COe.”

  Keep Reading
• 

  Real-Time Measurement for Unparalleled Safety and Control

  Tuesday, July 23, 2019 | Karla Graves

  Applications Industries

  Crude oil is processed into useful fuel such as gasoline, petroleum naphtha, diesel fuel, lubricants, asphalt base, heating oil, and kerosene at petroleum refineries all over the world.

  Keep Reading